怎样利用drivedroid重装系统(drivedroid如何给电脑重装系统)

手机怎么给电脑装系统？

用手机给电脑安装系统其实并不是很难，一般将安卓手机root后，安装DriveDroid工具，使用DriveDroid工具挂载一个纯净版的PE系统镜像，将手机使用usb线和电脑连接后，重启电脑选择PE系统盘启动就可以为电脑安装系统了。

为安卓手机安装DriveDroid工具，并对手机进行Root

使用手机为电脑安装系统，通常需要借助DriveDroid工具，将手机模拟为PE系统盘。一般手机使用DriveDroid工具，必须先ROOT才能正常使用。

下载纯净版PE系统和原版电脑系统

可以下载类似微PE的纯净版PE工具箱，制作纯净版的PE系统ISO镜像。如果电脑中没有可供使用的电脑系统，可以直接在msdn i tell you 下载原版电脑系统。

使用DriveDroid工具挂载纯净版PE系统镜像，制作PE系统盘

使用DriveDroid工具直接挂载此前制作好的纯净版PE系统ISO镜像，这样手机就可以直接当做PE系统盘使用了。

重新启动电脑，使用手机PE系统盘进入PE系统就可以为电脑安装系统了

将电脑重新启动，在启动选项中选择手机Pe系统盘进行启动就可以顺利进入PE系统正常给电脑安装系统了。

使用手机为电脑安装系统并不是很难，但需要注意的是：必须使用安卓手机，手机必须先ROOT，安装DriveDroid工具并使用该工具挂载纯净版的PE系统镜像。其实使用手机为电脑安装系统的思路，主要是借助DriveDroid工具将手机模拟为PE启动盘。

安卓是一个普罗大众的手机，也是一款开源的操作系统，开源的操作系统，因为有着极多的程序员的参与，让它的功能无限的扩展，那么通过安卓手机给一台病了的的pc安装操作系统，如今可以简单的实现了。

安装操作系统必须学会分区的知识，以及BIOS设置。这个教程是建立在这个基础上的。

为了完成这个流程，我们需要准备如下内容：

Rufus1.4.9或更高版本

带有DriveDroid的Androidroot手机

USB数据线

xp，win7，win8，win10镜像文件

pc一台

1、手机安装DriveDroid，并要root啊，保证10g的剩余空间，用来放pe镜像以及系统镜像文件。

打开软件后，点击加号，创建空白的镜像。

2、然后输入英文名字，设置大小，这里安装xp，所以1g容量就够了，win7最少要5000所以根据你自己的需要设置。输入好了，点击右上角的箭头位置等待它创建完毕。

3、创建完毕后，进去软件选择刚才创建的文件。

4、它会提示读写的模式，选择红圈的位置就可以了。

5、接着把你手机插入pc，然后打开这个Rufus软件，软件可以到官网下载，一般情况下开软件后就会看到你手机的，看不到选择图中红圈三角。

6、选择好，点击DVD那里选择win xp iso文件，然后点击开始就可以制作了，制作时间为十几分钟。弄好了会有提示。这时候手机就相当于一个启动盘，可以去任何一台电脑安装系统了。

当然在把手机当做启动盘的时候，应当先开启手机上面的DriveDroid软件。

到此结束，这也就可以通过手机给电脑安装操作系统了，不过我觉得，随身携带个U盘启动盘，要比这个来的快多了！也很方便！

个人觉得使用360安全卫士的系统重装功能更靠谱一些。

我电脑系统坏了如何用手机做系统启动盘给系统重装？

首先需要手机是已经Root过的安卓手机，安装好DriveDroid软件并留有10GB的空间作为存放镜像的空间。在手机设置好后，打开电脑使用Rufus 1.4.9或更高版本软件将手机设置为启动盘。在电脑BIOS中设置第一启动项为USB设备，就可以在启动的时候插入U盘重装。以下是详细介绍：

1、在手机上为电脑重装系统，首先需要是安卓系统已经Root的手机，而且需要在手机上安装Rufus 1.4.9或更高版本的软件，还需要保证手机内有至少10GB剩余空间；

2、打开之后需要按右上角的【+】，在弹出的菜单中选择【Create blank image】创建一个空白的镜像；

3、输入名称，然后在下面的框是输入容量，至少是5000以上，单位是MB。输入后点击右上角【Create】按钮；

4、创建完毕后，就可以在软件的主界面找到刚才创建镜像；

5、下面是读写模式，选择【S3C1】栏的第一个即可；

6、接着把你手机插入pc，然后打开这个Rufus软件，一般情况下开软件后就会识别您的手机，看不到选择Format Options，然后勾选【Quick format】；

7、上面的Device是您的手机，然后选择【Create a bootable disk using】，后面那个光驱图标选择刚刚创建的镜像，最后点击下面的【Start】就将手机创建为一个启动盘；

8、随后只需要和一般重装电脑一样，在BIOS界面将Boot选项设置为USB设备启动，插入手机重启电脑，按照提示进行系统重装即可。

虚拟机用drivedroid

虚拟机用drivedroid：1. 一个手机在同一个USB口上面可以虚拟出2到3个启动设备甚至更多，相当于插了多个优盘，而且不用插拔就能更换任意个优盘，具体数量取决于手机硬件；一个USB口只能插一个优盘，换盘必须重新插拔。

2. 虚拟优盘可以设置成只读或者可写，需要转换重新挂载即可，不需要隐藏或者量产，安全方便不怕病毒和人为破坏；据我所知现在市场卖的优盘都没有写保护开关了，到处插拔很容易感染病毒误删文件。

3. 手机内置SD卡的读写速度大大高于普通优盘，带一个手机相当于带多个高速优盘。

4. 启动系统以后手机不但可以当作优盘使用而且顺便还能充电，别人根本不知道你在干什么，十分隐蔽。

5.优盘你可能不会天天带在身上，但手机你几乎天天带，方便（虽然还要用到数据线，但现在安卓手机数据线基本都是通用的，即使自己忘记带数据线，随便也借的到吧）。

drivedroid手机重装电脑系统怎么用？

DriveDroid如果只用来装Linux的话很简单，将ISO镜像文件放进安卓机后，使用DriveDroid加载，即可让安卓机化身为启动盘。

装WIN7的方法如下：

In this post I will show how to create a Windows 7 installation disk that can be booted from your phone with DriveDroid. The disk will be made using files of the official Windows 7 ISO.

DriveDroid v0.7.0+

4GB free space on your Android phone

A PC with Windows 7 and 7-zip installed

Diskpart utility (installed by default on Windows 7)

A Windows 7 installation disk or ISO

Note that on some systems diskpart is not installed. I installed it seperately using the diskpart setup.

Image creation

First hook up your phone to your PC using a USB cable.

Next we'll have to create a blank image on your phone. On this image we will eventually store the installation disk. In DriveDroid we go to the + button and choose 'Create blank image...'.

Choose a filename like 'windows7.img' and choose 3500MB as the size for the image. You can uncheck 'Partition table (MBR)' and choose 'None' for the filesystem. Now hit the 'Create' button on the top-right.

As a side-note, we choose to not create a partition table and filesystem here because DriveDroid does not support formatting NTFS filesystems. NTFS is required for the Windows 7 installer to work. We will partition and format the image from your PC in Windows, but we'll get to that.

This will create the image file in the background. Open the notification-bar to see when the image creation is finished. Most time will be used by 'Allocating file...', which creates a 3500MB file. This can take half an hour or so on most devices that have a FAT-32 filesystem on their SD-card, other filesystems do not seem to have this problem and will finish almost instantly.

It is recommended not to do anything else on your phone while the image is being created. At the moment the image creation process can be killed by Android when there isn't enough memory available on the device to launch other applications. I still need to figure out how to avoid this.

Once the image is created go to DriveDroid.

Partitioning and formatting

Select the image in DriveDroid and click the option that says '(read-write)'. As soon as we have done that, Windows will find a new USB drive. A window will popup in Windows asking to format the drive.

Choose 'Cancel': this method of formatting is not compatible with a Windows 7 install disk, since it'll not create a partition table and bootsector. Thus it will not boot using this option. We will partition and format the disk properly using diskpart.

Go to start and type cmd.exe. Command prompt will open.

Start diskpart by typing diskpart.

Show the connected disks by typing list disk.

You will see that the image you just created in DriveDroid is listed here as a disk of 3500MB. In this example it is listed as Disk 3.

To work on disk 3, we need to select it by typing select disk 3.

Next we create a partition table and fill the bootsector by typing clean.

Now we can create a partition by typing create partition primary.

The partition hasn't got a filesystem yet. For the Windows 7 install disk we need a NTFS filesystem. We can format a NTFS filesystem on the partition by typing format fs=ntfs quick. This will take a few seconds to a minute or so.

Now we have a bootsector, partition table, partition and filesystem. We only have to mark the partition as 'bootable' to be able to boot from it. We do this by typing active.

Finally we leave diskpart by typing exit. You can close the window after that.

Copying files

Now we have a disk that has a filesystem and can be booted from. We should be able to see the empty disk in 'My Computer'. In this example it is disk G:.

Next we need to copy files from the official Windows 7 installation CD to the USB drive. If you have the CD at hand, you can just copy those files over.

However, since I only have an ISO file I need to extract the ISO to the USB drive. We can do this using 7-zip. Go to the Windows 7 ISO using Windows Explorer. Right click the ISO file, choose 7-Zip and choose Extract files....

Choose G:\ as the destination to extract the files to and hit OK.

Extracting the files will take a while.

Once the files are extracted the contents of your disk should look similar to this.

We are finished. The disk should be usable and is stored in windows7.img on your Android phone. If you want to try it on another PC, first safely remove the disk by left clicking the icon in your system tray.

And choosing your phone from the menu. In my case it is GT-I9000 (Samsung Galaxy S).

Unplug your USB cable and plug it in a PC where you want to install Windows 7. Make sure you still have windows7.img selected in DriveDroid.

Boot the other PC, go to the bios and put your phone as the first boot device.

Save the changes and reboot. The PC should now boot the Windows 7 installer from your phone.